Precautions for starting up laser equipment in winter (water cooling)
May 09,2023 | TOPTEK
Step1: Make sure that the indoor temperature is 5-35°C before the laser equipment can be turned on and used
Step2: Check whether the water cooling tube is frozen, and the laser device cannot be turned on if it is frozen
Step3: If there is ice, please turn on the air conditioner or heating facilities, adjust the ambient temperature of the laser equipment to 5-35°C, and let it stand for more than 4 hours. The next step can only be performed after the ice melts naturally. Do not take Violent deicing to avoid damage to equipment hardware.
Step4: After confirming that the laser equipment is not icing, it is necessary to turn on the chiller for preheating
Step5: After the circulating temperature of the chiller rises to normal temperature (recommended temperature: about 25±3°C), the laser can be turned on
Step6: After normal start-up, adjust the energy to below 30%, and preheat for about 10 minutes after emptying the light, and then proceed to normal production operations.
Comment
